#57 Awesome Shooting Bench Build Under $100 00

#57 Awesome Shooting Bench Build Under $100 00

How to Build a fantastic shooting bench for left or right handed shooters for under $100.00, Video has all information for you you to build one for yourself.
Amazon link to Dewalt DCD791D2 20V Max XR Lithium-Ion Brushless Drill Driver
http://amzn.to/2vQN6YZ

Amazon link to Dewalt 20V Max XR Drill driver and Impact Gun Combo
http://amzn.to/2vQCTMq

Link to our Facebook page
https://www.facebook.com/Outdoors-With-The-Morgans-1326440487390931/

Marathon Man by Audionautix is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/)
Artist: http://audionautix.com/

50 Comments

  1. Jason Chodorowski on October 30, 2021 at 6:29 pm

    What was the approx. weight of the finished project? I know you said you’d move it with the tractor, but would it be movable by 2 decently strong dudes? I’d like to build one at home and take it to my farm, but I don’t want to build one at home and have it turn into a plant stand because it’s too heavy to move. Love the video…keep ‘em coming



  2. Mark Hill on October 30, 2021 at 6:29 pm

    I like this but 1 question there is no cut for the middle spar at 40′ in your cut list? Please advise.



  3. George Ramirez on October 30, 2021 at 6:30 pm

    Nice shooting bench and I have the same dewalt tools….great tools!!! Would like a list of materials and dimensions so that I can make one also!!!



  4. vtjpd on October 30, 2021 at 6:30 pm

    Built my own variant based with your general measurements as a basis using just the lumber I had around the house. Thanks!!



  5. paul_hartsel24 on October 30, 2021 at 6:30 pm

    Did you use pressure treated lumber?



  6. simon burr on October 30, 2021 at 6:31 pm

    Looks amazing



  7. Shawn Doe on October 30, 2021 at 6:31 pm

    Great build, came out really nice. Awesome planning to use up all the material. I was also impressed by the right angle skill saw cuts!!! Thanks For Sharing: Shawn



  8. BigT on October 30, 2021 at 6:32 pm

    just not watching this video in Oct 2021, is it still under 100.00? 🙂



  9. Mark Hill on October 30, 2021 at 6:32 pm

    Just getting back into shooting after a 20year break Thank You for a great vlog I will be making this bench 👍



  10. Mary Aldrich on October 30, 2021 at 6:33 pm

    Nice bench.. thank you for sharing, Mike



  11. Timothy Devlin on October 30, 2021 at 6:33 pm

    I hope he has a range in his front yard…he won’t be moving that bench in his jeep.



  12. James Rowe on October 30, 2021 at 6:35 pm

    Just finished my shooting bench using your plans mixed with a few others. Turned out well. Thanks for the video. Here is 2020 the lumber is NOT under $100. lol



  13. Doyle Metzinger on October 30, 2021 at 6:36 pm

    I made it with Woodprix plans!



  14. Outdoors With The Morgans on October 30, 2021 at 6:36 pm

    Amazon link to Dewalt DCD791D2 20V Max XR Lithium-Ion Brushless Drill Driver
    http://amzn.to/2vQN6YZ

    Amazon link to Dewalt 20V Max XR Drill driver and Impact Gun Combo
    http://amzn.to/2vQCTMq

    Link to our Facebook page
    https://www.facebook.com/Outdoors-With-The-Morgans-1326440487390931/



  15. Starr Stewart on October 30, 2021 at 6:36 pm

    I’m sure the best wood makers instructions is on woodprix website.



  16. Donnie Moore on October 30, 2021 at 6:37 pm

    I got the older dewalt drill that’s not brushless. I’m going to replace it with a brushless once it craps out. I’ve been saying that for the last 4 years they just won’t quit



  17. William johnson on October 30, 2021 at 6:37 pm

    Great video
    Use 1 8 foot deck board and 2 10 foot deck boards



  18. Mark Trebacz on October 30, 2021 at 6:38 pm

    Thanks for the great video, just built one last weekend!



  19. capitalD D on October 30, 2021 at 6:39 pm

    Nice job. Great video, that is for posting



  20. Russell Bowman on October 30, 2021 at 6:42 pm

    Nice Job On The Bench!! 👊



  21. Fletcher Atkinson on October 30, 2021 at 6:42 pm

    The only thing I’m doing different is working my deck boards in from each side so I have one narrow piece in the middle.



  22. Garzon Laperle on October 30, 2021 at 6:43 pm

    You can go to woodprix if you would like to make it yourself guys.



  23. Thomas Hood on October 30, 2021 at 6:44 pm

    What two boards (length) were the ones you cut at 45 degrees



  24. Ricky Burton on October 30, 2021 at 6:45 pm

    Dewalt is made in China and they suck. They don’t last! Get a Makita. It will last forever! And use any color other than grey!



  25. Richard Dean on October 30, 2021 at 6:45 pm

    One of the best video tutorials I’ve ever seen. One question from a tinhorn here…at 6:29 of the video what is the distance between the two rear 2×8 vertical rear bench supports? spacing is critical to ensure proper seat support. It looks like 3 or 4 inches maybe? Can someone clarify, please?



  26. Critical Reasoning on October 30, 2021 at 6:47 pm

    WARNING Inappropriate Mind Numbing and Vomit Inducing background muszac that will make you stupid enough to think that this is an awesome design.



  27. MorninTripper on October 30, 2021 at 6:47 pm

    Thanks for the great shooting bench plans!

    Time Line:
    2:50 Cut List*
    5:10 Framing Pics
    5:30 Assembled Frame w/o Top
    6:10 Top View Dimensions
    6:15 Elevation Dimensions #1
    6:20 Elevation Dimensions #2
    6:44 Material List
    12:34 Finished Bench Pics

    I’ve worked up a couple lists that I found useful to me before I set out to make this bench. Of course, as others have noted, I don’t believe you have included the materials and/or cut list for the top. It looks like to me you have used 5/4 x 6 treated deck boards for the top and I purchased (4) 8 footers for the top. Easy enough to cut them to fit the top by using the framed top as a pattern once I completed framing the bench… simply lay the boards on the side-by-side and mark the bottom with a pencil, remove and cut to fit.

    My Materials List and current prices at local Home Depot as of 29 Dec 2019:

    (10) 2x6x8 $5.47 each (Total: 54.70)
    (1) 2x8x12 $12.17 each
    (4) 5/4x6x8 $5.47 each (Total: 21.88)
    (1) 1 lb box #9×3" Deck Screws $9.47 each
    (1) 1 lb box #19×3-1/2" Deck Screws (used where screwing into end grain) $9.47 each
    Total: $107.69 Note that I purchased an extra 2×6 and a longer 2×8 than necessary. For slightly higher cost I should have room to cull and optimize for best quality, and maybe eliminate a return to HD to replace a defect or miss-cut. All boards are Pressure Treated Lumber.

    Cut List For Framing Members:

    Qty Material/Length/Part Description

    4 2×6/35"/Forward Legs
    3 2×8/35"/Rear Legs
    4 2×6/43"/Top Front & Rear, Bottom Front & Rear
    4 2×6/25"/Top Ends, Bottom Ends
    4 2×6/20"/Rear (Center) Top and Bottom
    3 2×6/44"/Seat Horizontals
    2 2×6/17"/Seat Verticals
    1 2×6/40"/Top Stretcher
    6 2×6/16-1/2"/Seat Tops



  28. Troy Anderson on October 30, 2021 at 6:47 pm

    Did I miss the complete lumber package to build this?



  29. Mr. HomeOwner Cooking and DIY on October 30, 2021 at 6:47 pm

    Great looking bench – thanks! I’m looking to make one as well. I’ll link your video if I do!



  30. Lazarus 2020 on October 30, 2021 at 6:48 pm

    Cool instrumental = Ngay Da Do’m Bong by Mai Trang



  31. Joe on October 30, 2021 at 6:52 pm

    Ha, with lumber prices today, it should say, for under $300. Nice design though. Thanks.



  32. Matthew Sims on October 30, 2021 at 6:56 pm

    This is crazy. At work, we are alway talking about how our phones listen to us. Just this week, me and a friend of mine were talking about building a a really good shooting bench. I come home from work today, click on Outdoors with the Morgans and this video comes up and this is a video that i hadnt watched yet. Just may be something to this stuff about our phones listening to us. I dont really believe that but we have talked about it. Anyway, that looks like a nice bench. Thanks for taking to time to show this. Stay well, stay safe and yall HAVE A DAY



  33. john rehm on October 30, 2021 at 6:58 pm

    OMG i have been using a speed square for ever but never to guide my skill saw and keep my cuts square! That’s the most priceless tip I have ever gotten from a you tube video.



  34. Michael Sorrell on October 30, 2021 at 7:03 pm

    Really awesome thanks I built one with my brother in law really appreciate the time and video 👍🏻



  35. William johnson on October 30, 2021 at 7:05 pm

    List of boards for top?



  36. Howard Swing on October 30, 2021 at 7:06 pm

    good use of material beefy construction



  37. RonAndHeather J on October 30, 2021 at 7:07 pm

    Mike I am not seeing where the measurements are for the top and what size would you used.
    Plan on building this this weekend and needing to know the type boards used on top and the dimensions



  38. Charlie Gardner on October 30, 2021 at 7:07 pm

    Did you use 3" Deck screws?



  39. Len Walker on October 30, 2021 at 7:10 pm

    This bench looks rock solid. A great prototype. I am going to build one for a right-handed shooter. That should cut some of the weight off. This gets me off to a great start. Thanks.



  40. Richard G. on October 30, 2021 at 7:11 pm

    Sorry to say you won’t be building that beautiful shooting bench for a hundred dollars, with today’s lumber prices. you be looking closer to $200.00.OUCH



  41. Christopher Lange on October 30, 2021 at 7:12 pm

    Great video do you have a cut list for the lumber?



  42. 1st Name Basis on October 30, 2021 at 7:12 pm

    Great Video …learned so much ..soon as there is Lumber I will be doing this …



  43. Silent Stream on October 30, 2021 at 7:13 pm

    Not sure you should have painted green wood before it’s hasn’t cured yet.



  44. JrFans88 on October 30, 2021 at 7:14 pm

    I gave a thumbs up, just for the idea of using a speed square, as a saw guide



  45. Aaron Gamache on October 30, 2021 at 7:18 pm

    Thanks for making this video! I was wondering what length the boards are that make the 45° angle on the deck



  46. Paul Sannino on October 30, 2021 at 7:19 pm

    Mike, I learned something from watching you cut the board. Using the square as a guide, awesome trick.



  47. Mattsalas Salas on October 30, 2021 at 7:20 pm

    Nice man I’ll definitely be building one of these



  48. Wayne Latham on October 30, 2021 at 7:25 pm

    Nice dog and chickens….and fast too!



  49. Ricky Burton on October 30, 2021 at 7:27 pm

    That’s really nice!! 😃👍👍🇺🇸🇺🇸🇺🇸.



  50. Michael Wiser on October 30, 2021 at 7:28 pm

    Great video Mike! I watched this video over a year ago and finally built my own shooting bench based on your plans! Great content on your site, keep it up!