8 Adjustable Positions!? – EMG 8-Position Ultimate M4 Buffer Tube – Quick Look

8 Adjustable Positions!? – EMG 8-Position Ultimate M4 Buffer Tube – Quick Look

Get Yours Here:

ARES Spec – https://www.evike.com/products/89967/#a_aid=EvikeTV
Real Spec – https://www.evike.com/products/89962/#a_aid=EvikeTV
TM Spec – https://www.evike.com/products/89972/#a_aid=EvikeTV

Colors Available: Blackout, Electric Blue, Garnet Red, Magnetic Grey, Sandbox

The enthusiasts here at EMG go back and forth with various parts trying to find what we like best in our builds. However, every now and then when we cannot find something that matches what we are looking for, we have it made ourselves; thus the EMG Enhanced Buffer Tube was conceived.
The EMG Enhanced Buffer Tube features enhancements to improve overall usability, reduce weight, and improve durability. Also let’s be real chief, half of the stuff we buy for our guns we do so to make them look cool so we definitely didn’t want to gloss over that aspect. To achieve all this, we consulted a manufacturer of real AR15 accessories to help move this project forward. What we have come up with was a Mil-Spec buffer tube made from 7075 Aircraft Grade Aluminum that we have facets milled out to shave off excess and unneeded friction and weight. We spaced out each adjustment notch to be closer together with eight total positions which allows for much finer adjustments for your preferred length of pull. Additionally we have the buffer tube drilled and tapped so a stop-screw can be installed at your preferred maximum length of pull so under gross motor skill scenarios, the stock can be easily extended to your preferred length each and every time. The buffer tube is available for Tokyo Marui spec, G&P / ARES spec, as well as real spec (gas blowback) lower receivers; each buffer tube is hard anodized for weather resistance and comes in various colors to fit not only your tactical builds but also your hot rod, race/competition builds as well.

Evike.com; Home of the World’s Largest Airsoft Showroom Store.
Check our website regularly for the newest Airsoft guns and gear! Don’t forget to use our coupon codes to save BIG on everything Airsoft!

Enjoy the video? Follow the link to subscribe:
http://www.youtube.com/subscription_center?add_user=evikecom

Website: http://www.EVIKE.com
Facebook:http://www.facebook.com/AirsoftEvike
Instagram: https://www.instagram.com/AirsoftEvike/
Youtube: http://www.youtube.com/user/evikecom
Twitter: https://twitter.com/evikesuperstore

DON’T FORGET TO LIKE AND SUBSCRIBE FOR MORE AWESOME CONTENT!!

33 Comments

  1. Carson Romine on August 26, 2022 at 7:50 pm

    almost bought one of these, but i didn’t know if it had the screw for buffer tubes lol



  2. websterboyHD on August 26, 2022 at 7:50 pm

    ya’ll make this for TM NGRS?



  3. damen juckett on August 26, 2022 at 7:57 pm

    Anyone try this on a real ar15 yet?



  4. insipidoaf on August 26, 2022 at 8:00 pm

    got mine and I really like it! Just wish it came with hardware and a castle nut.



  5. LoboTheGreyWolf on August 26, 2022 at 8:01 pm

    Which one would fit on a lvoa c ?



  6. Devin Ghillie on August 26, 2022 at 8:02 pm

    Why no castle nut with them though?



  7. Marc Chen on August 26, 2022 at 8:02 pm

    Wow look awesome! Wish we could get these here in Australia for our Gel Blasters, if only Evike would ship mutually fitting airsoft/gelsoft parts to the land down under πŸ™πŸ½ 😒



  8. Marcus le babushka on August 26, 2022 at 8:02 pm

    evike will this hpa engine https://www.evike.com/products/54993/ fit in this barrett https://www.evike.com/products/30917/



  9. UpangtheMan on August 26, 2022 at 8:05 pm

    Wish he would say "you can only use milspec stocks on these." Airsoft spec stocks like VFC QRS won’t fit. I ended up using the Valken ATS Merens on my build.



  10. Derek Robak on August 26, 2022 at 8:05 pm

    Will it fit a g&g pcc9



  11. Hadz on August 26, 2022 at 8:06 pm

    Would one of these be compatible with first gen CA Nemesis M4? (came with pdw stock)



  12. Judge [3-5 Airsoft] on August 26, 2022 at 8:07 pm

    Awesome now I can finish up my zip tie build!



  13. Thomas Hawkins III on August 26, 2022 at 8:07 pm

    I just bought 3 to fit my krytac lvoa and GnG Raider m4 commando; they fit into the guns but none of the stocks fit. It seems as if the bottom portion is too wide for the gate.(I bought the TM variant not the real spec or ares). So two questions: will the PTS eps stock fit this Tokyo Mauri style tube. And if not which stock Under 60 bucks that stores lipos will?



  14. SparkyMTB on August 26, 2022 at 8:08 pm

    For me, it needs to be a folding stock buffer tube.. someone really needs to come out with a folding stock tube. I bet lots of people would buy them just like in the real steel firearms world



  15. The Bacon8r on August 26, 2022 at 8:13 pm

    But still no information on why castle nut is not included or which ones fit?



  16. AP BaNdiT on August 26, 2022 at 8:22 pm

    Hey airsoft people what AK experiences have you guys had and what would you recommend for a first AK I have a krytac m4 and wanna change kinda going the milsim route



  17. Timey on August 26, 2022 at 8:24 pm

    What’s the difference between the Ares and the Tokyo Marui versions? They look very similar in the product shots



  18. aleksander on August 26, 2022 at 8:26 pm

    Dang, get me an anodized dark green one and I’m sold



  19. mke pm on August 26, 2022 at 8:29 pm

    Hello,
    Which one should i chose for my m4 specna arm ? It has a QD spring change.
    How long it is in cm? I need a longer buffer tube .
    Thanks evike πŸ‘‹



  20. kazunari Conway on August 26, 2022 at 8:30 pm

    would this fit a cyma m4?



  21. Andrew Cairns on August 26, 2022 at 8:31 pm

    shame its $41 to ship the uk and only $28 for the tube itself πŸ™



  22. SwedishFishies on August 26, 2022 at 8:32 pm

    I bought one of these for a custom build, and honestly, I was kinda disappointed. My stock, which fit on my old buffer tube just fine, almost refused to go on this buffer tube *at all*. No screw is included to mount if to the receiver for TM spec rifles, so that’s a wash. I had to use a different screw and an O-ring to get it to sit tight. And finally, *why* is there no castle nut included???? I literally had to burn 30 bucks on a real steel one because Evike doesn’t include basic hardware. As soon as it goes back in stock, I’m getting a Polarstar CGS to replace this disappointment.



  23. Terminatorbart on August 26, 2022 at 8:35 pm

    Eight! Aaahhhhh! 😁



  24. Ray Perez on August 26, 2022 at 8:35 pm

    Looking to buy one of these for my classic army m16 skirmish model but not sure which one I need?πŸ€”



  25. greg tmyrs on August 26, 2022 at 8:35 pm

    if my aeg is a commercial style buffer tube, could i swap it with this and would it still mount onto the receiver properly?



  26. Spartin11794 on August 26, 2022 at 8:37 pm

    The real steel ones are they milspec or commercial?



  27. John Wirth on August 26, 2022 at 8:40 pm

    Nice



  28. Cjg7 Gray on August 26, 2022 at 8:41 pm

    Hello, can I talk to Matt please



  29. Derek Robak on August 26, 2022 at 8:43 pm

    I can’t pull the wired out of my buffer tube, the hole is to small, what do I do



  30. hog man on August 26, 2022 at 8:46 pm

    Will this work for a phantom extremes Iv



  31. andrew sinabutar on August 26, 2022 at 8:46 pm

    is it only me or this one looks like one from vat 19?



  32. -- on August 26, 2022 at 8:46 pm

    Offer it in silver and take my money.



  33. Chan Kim on August 26, 2022 at 8:48 pm

    Would this buffer tube work for arcturus m4?