I tried this unfortunately it does not work on Radom/FB blanks I drilled the he’s with this jig they are about half a hole to far rearward😓
Jack Rasmussenon November 14, 2021 at 7:39 pm
Thanks
TJARK KUEHLon November 14, 2021 at 7:41 pm
Would this work for a yugo rpk and a psl receiver as well?
Charlie Pippinon November 14, 2021 at 7:49 pm
Can you use this jig to drill FCG holes in an 80% reciever that already has the center support installed? I’ve looked on the AK Builder website but can’t find the answer.
Thanks Mel64,
Watching your videos has given me the confidence to start building.
Cktime ThirtyTwoon November 14, 2021 at 7:52 pm
Is the AK 74/47 jig the same? My cousin is looking to buy a 47 jig and we want to know if the 74 could be bent on the same jig as well? Any differences as far as jig/tooling goes?
C company /on November 14, 2021 at 7:54 pm
Thought you were doing the trigger holes also. Just saw this jig on ak builder. Buying mine in a few weeks. Great video 👍
lilCazon November 14, 2021 at 8:07 pm
Great videos series and one of the best on YouTube. I am going to pick up this jig and was wondering if u predrill the holes first with a smaller bit? Also do you ream the holes to size? Thanks!
Jorqlip 1on November 14, 2021 at 8:07 pm
Do they make a receiver jig for cutting the rear for a side folder trunnion?
C company /on November 14, 2021 at 8:15 pm
Great videos, I just bought both of jugs. Now I’m waiting for long rivet jig and today I’m ordering small rivet jig. Would you recommend drilling all the way through the receiver or one side at a time?
C company /on November 14, 2021 at 8:15 pm
My receiver jig is on its way!
tkarlmannon November 14, 2021 at 8:19 pm
You are the second guy who either has never done this before, or has done too many to recall all the steps. Can you recommend someone who has a more detailed procedure for those who have never done this before?
We've got a Sneetch!on November 14, 2021 at 8:20 pm
Mel64D – What do you do for the rear stock, being there are so many types available? I’m looking at an AK-74 with the folding stock. (Subbed)
I tried this unfortunately it does not work on Radom/FB blanks I drilled the he’s with this jig they are about half a hole to far rearward😓
Thanks
Would this work for a yugo rpk and a psl receiver as well?
Can you use this jig to drill FCG holes in an 80% reciever that already has the center support installed? I’ve looked on the AK Builder website but can’t find the answer.
Thanks Mel64,
Watching your videos has given me the confidence to start building.
Is the AK 74/47 jig the same? My cousin is looking to buy a 47 jig and we want to know if the 74 could be bent on the same jig as well? Any differences as far as jig/tooling goes?
Thought you were doing the trigger holes also. Just saw this jig on ak builder. Buying mine in a few weeks. Great video 👍
Great videos series and one of the best on YouTube. I am going to pick up this jig and was wondering if u predrill the holes first with a smaller bit? Also do you ream the holes to size? Thanks!
Do they make a receiver jig for cutting the rear for a side folder trunnion?
Great videos, I just bought both of jugs. Now I’m waiting for long rivet jig and today I’m ordering small rivet jig. Would you recommend drilling all the way through the receiver or one side at a time?
My receiver jig is on its way!
You are the second guy who either has never done this before, or has done too many to recall all the steps. Can you recommend someone who has a more detailed procedure for those who have never done this before?
Mel64D – What do you do for the rear stock, being there are so many types available? I’m looking at an AK-74 with the folding stock. (Subbed)