ATI H&R/NEF Stock with Forend Installation
ATI H&R/NEF Stock with Forend Installation
Video installation instructions for the ATI stock and forend for the single shot H&R and NEF firearms.
Like us for free tips and giveaways! http://Facebook.com/ATIgunstocks
View this product and all that ATI has to offer at http://ATIgunstocks.com
does ATI make this but for rossi single shots
saw the question below, but it wasnt answered. Is the "buffer tube" same diameter to accept other AR type stocks?
yes the the forend is attache to the barrel but apart from the screw dose the rest of the forend touch the barrel that wat i want to know thx
@patdud1979 no the forend is attached to the barrel by the single forend screw
Unfortunately you cannot swap out the pistol grip on this stock.
Ok now I am confused on which one to buy. I just got a H&R 12 gauge 28" Pump. Which ATI Stock can I use?
It sure will! Free shipping on atigunstocks(dot)com too!
@ nathan00campbell they make one especially for rossi models.
@patdud1979 no that single screw holds the forend onto the gun, rest of the forend just sits below the barrel
No, this Stock will not work for the pardner pump shotgun
Sorry it does not.
will this fit on the h&r 1871 semi auto?
Hey Scott, it will definitely fit – They must have thought you mentioned the Pardner Pump. Sorry for the confusion!
Fits Most Rossi rifles and shotguns except for the Rossi Wizard. Tactical Forend will not fit Rossi Youth Models.
Note Some Minor Modification may be Required.
If your Rossi rifle or shotgun has a barrel diameter of 3/4” or less, there will be a large space between the small barrel and forend
Fits H&R/NEF 12, 16, & 20 Ga, 410, H&R and NEF single shot shotguns or rifles. Does not fit the H&R Pardner Pump.
Hey jonnyboy, just the one that’s supplied.
Awesome, thanks for the business!
hi i was just wondering if the forend if free flotting from the barrel ?
This one will work, this part number on our website: Part #HRN4100
I want to put a minimalist stock on it but what size buffer tube os it
@ nathan00campbell they make one especially for rossi models.
beatty169 14 hours ago
What happened to your scope?????
would these work with a 16 Gauge but same shotgun? I’m very interested in a stock and forend!
Can you attach a grip to the forend? Is there any size picatinny that will fit on the bottom of the forend? I want a pistol grip and forend grip come on ati it has to be possible…?
I just bought my stock can’t wait to install it…..
Also, is there a way to put a side saddle shot shell holder on the collapsible stock ? Thanks for the info.
i just got mine in… it already had the butt stock on but i want to take it off and i pulled down on the lever but it wont come off. and i need the spacer so it wont wiggle
Will this stock fit a Rossi 410 shotgun?
I contacted ATI, and someone said it would NOT fit my H&R Pardner 12 gauge single shot? In the description of the product it says it would. Can someone PLEASE set the record straight? Will it or will it not fit my Pardner single shot 12 gauge?
Does this kit come with the recoil pad shown at the end of the video?
Does this fit the 10 gauge?
can i put it on a rossi single shot 410?
MrNEFF209, what type of firearm are you putting it on? Feel free to send us a message so we can help you further or give us a call at 800-925-2522
Sorry, there is no place for a rail. There is a swivel stud on the forend.
will this fit the ultra slugger?
Just purchased one of these, and returned it for damage. I ordered a second, and like the first one, the instructions say it comes with an M8 Washer. There is no washer present in either of the ones I bought. Was this a misprint, or is it actually supposed to come with a washer?
Do you sell kits for a 20 gauge Topper Jr 490 with a snap-on forend?
is the buffer tube mil-spec?
@ ATIGUNSTOCKSUSA
Do y’all still sell the strikeforce muzzle mount for the h&r’s?
Will an AR 15 pistol grip fit this stock?
Can the buffer tube be removed for a pistol grip only set up?
There’s no designated means of mounting one, but you could modify it to bolt one on. Just remember that modifications like this would void your warranty.
Yes, it has "Two Sling Swivel Studs" –
If you look on the product info on our website you can find this out and more. (Link above)
does the kit come with a forend sling or bipod eyelet?
No, we haven’t in a while sorry
Ok I will give it a shot. Hopefully it fits the pump. Thank you for replying.
Hey there. Probably to late to ask this but. Would this fit my sons H&R Singleshot .243 Not quite sure if it’s a youth model or full size. From rossis homepage their seems to be no difference but not sure. With it fill it right either way?
Potentially, it is made for 20 gauges so it will require some modification to fit on the 20 gauge.
Can I put any AR stock on this kit or just the one you supply?
Thanks for shifting out of the foregrip we didn’t need to see that at all ! 👌