50 Comments

  1. 骆星驰 on June 29, 2022 at 7:22 pm

    Bloopers but still excellent review!



  2. Tactical Mischief on June 29, 2022 at 7:23 pm

    I just ordered the C&H MOS plate with the front shroud. Can’t wait to test it out. Buck’s a really good guy, too.



  3. Lev Lev on June 29, 2022 at 7:24 pm

    How tall suppressor sight I have to use with this plate?



  4. Brandon Sweeney on June 29, 2022 at 7:24 pm

    I’ve been running this plate since it came out. Now I didnt have any issues with my stock plate. One thing I have noticed is since I mounted the C&H plate with the thread locker they give you ive had zero movement of my mounting screws. When I mounted the stock plate I secured the screws with blue loctite. Over time they backed out and shifted my zero. Red loctite however seemed to keep them from backing. Sorry I can’t remember the name of the thread locker they give you but it is superior I promise you. Vibra-someshit its great! So is the plate lol. So happy with it that C&H is the company I chose to mill my 19x for another RMR.



  5. B.C. Pittman on June 29, 2022 at 7:26 pm

    I don’t think I’ve ever witnessed a review that I’ve trusted more. Literally paused after the burn down and ordered the plate 😂



  6. Ryan Bilby on June 29, 2022 at 7:26 pm

    Does anyone know what size sights we need for this plate? Sorry if I missed it in the video.



  7. BlackConservative on June 29, 2022 at 7:26 pm

    People still invest money in Glock when you have to spend hundreds of dollars after the fact to get “perfection”



  8. Ed P on June 29, 2022 at 7:29 pm

    Great info 👍



  9. Gabriel Kierulff on June 29, 2022 at 7:29 pm

    Hi Aaron! Thank you for the review! Which iron sights were you running with it?



  10. 2016KTM450 on June 29, 2022 at 7:30 pm

    I had a bad experience with C&H. I heard all the good things, but the plate I got from them was a plate made by CZ, modified by C&H, and the quality sucked. The plate is not flush or square. The mounting screws were the wrong length too. Their customer service was very nonchalant and did not give a shit.



  11. Colby C. on June 29, 2022 at 7:30 pm

    The best John Deere commercial I’ve seen



  12. Den Sa on June 29, 2022 at 7:31 pm

    40+ seconds of you shooting intro… really. Skip that and make a 10 minute of your shooting for those who are impressed with your gun handling.



  13. Moe Green on June 29, 2022 at 7:31 pm

    I stumbled across C&H Precision looking for a SBR Engraver in in Savannah. Great group of folks.



  14. The Golf Life on June 29, 2022 at 7:33 pm

    Dynamics is the glock 17 in this setup your favorite weapon? Would you like to review our newest Cajun Gun Works CZ P01 with the full boat of customization? – Pacific Northwest Tactical on Instagram at @Pacific_Northwest_Tactical



  15. Urban Tactical on June 29, 2022 at 7:34 pm

    Have you or have you known anyone that has had a slide milled from them?



  16. KD _online on June 29, 2022 at 7:34 pm

    Can we get a c&h precision v4 MI/LEO plate with the iron sight for Glock? Being wanne to buy 1 but can’t find no reviews on it



  17. S F on June 29, 2022 at 7:35 pm

    You lucky ducky with your fun switch! I’m jelly!!



  18. Todd on June 29, 2022 at 7:35 pm

    Never had an issue with my C&H plates. Had one plate arrive damaged, and their customer service went above and beyond. I also love forward controls optic plate for glocks. Actually might prefer the forward controls plate. Unfortunately they only make two plates. Both for glocks, one for RMR and one for DPP. With so many fantastic optics being available now, I’ll still buy from C&H. With that said, if it’s just an RMR on a Glock… I go Forward Controls.



  19. Anderson C on June 29, 2022 at 7:35 pm

    I heard good things about C&H plates… Yet I heard Walther partnered with them for their PDP. gun.. which has gotten negative press fire it’s plate… Thoughts?



  20. kingant on June 29, 2022 at 7:36 pm

    Thanks for the info Aaron! Anyone know what Mag Extension he uses for his Glock 19?



  21. tim owens on June 29, 2022 at 7:36 pm

    Great video I just mounted my 507 k x2 with a chpws plate. 🤘🇺🇸



  22. Brandon Maples on June 29, 2022 at 7:38 pm

    Do you still use the trijicon seal plate with the C&H? Thanks



  23. Civilian Standards on June 29, 2022 at 7:38 pm

    haha some editing issues or you just got huge balls!



  24. Chog Mack on June 29, 2022 at 7:41 pm

    Glad hes had time to drop some new videos.

    Aaron,

    WOULD LOVE TO SEE A VIDEO ON THE SIGHTMARK MINISHOT MSPEC PISTOL OPTIC!



  25. TacticalStrudel on June 29, 2022 at 7:45 pm

    Do you still need the SRO-MOS Mounting kit if you use this plate?



  26. Clint Rice on June 29, 2022 at 7:45 pm

    GREAT VIDEO!!! Thank you for lesson much needed! 💪🏿👍🏿



  27. Bradley Bobish on June 29, 2022 at 7:46 pm

    Tighten that group Aaron!



  28. Vigilance247 on June 29, 2022 at 7:46 pm

    My C&H plate just arrived!



  29. Paul Goss on June 29, 2022 at 7:46 pm

    dig the Gorilla hat….where can I find it?



  30. David Rodriguez on June 29, 2022 at 7:48 pm

    Piss poor customer service



  31. Kole on June 29, 2022 at 7:48 pm

    I’ve watched several of your videos and just now realized that you are a leftie… Can’t believe it.



  32. Hoods House on June 29, 2022 at 7:49 pm

    Thank God for that company they made the mos a option and a good one at that !



  33. No Excuses on June 29, 2022 at 7:51 pm

    Glock will probably never step up and improve heir plates same as never improving their sights. After market fills that requirement already.



  34. Yah Boii on June 29, 2022 at 7:51 pm

    F’n love these videos man 💪🇺🇲



  35. Wreck It Raul on June 29, 2022 at 7:54 pm

    is the opf g plate better?



  36. The Expat Gunner on June 29, 2022 at 7:54 pm

    Always hear good things about C&HP plates and would never opt to use Glocks OEM. I’ve gained a lot of knowledge watching Aaron’s content and am grateful for the information and insights such videos provide. Ended up choosing the Aimpoint ACRO as my first venture into the world of MRDS and glad there wasn’t an OEM MOS plate I could fall victim to. That said I have been using the recommended Aimpoint OEM plate which is manufactured by B&T out of Switzerland and it been solid as a rock for the last 1.5 years.



  37. Sheepdog2406 on June 29, 2022 at 7:55 pm

    Purchased the V4 Plate to mount onto my G45 MOS and unfortunately one of the t-posts sheared off while tightening it down. Ordered a replacement kit from C&H and the t-posts don’t even fit correctly into the V4 plate. Haven’t had an opportunity to reach out to them yet but I hope their customer service is as good is everyone is saying. First impression is a bit disappointing to say the least.



  38. Rick Sanchez C137 on June 29, 2022 at 7:56 pm

    Hey Aaron what gloves are you wearing in this video?



  39. Kyle Blackwelder on June 29, 2022 at 7:58 pm

    I received my first C&H plate, to try a newly acquired 509t. This plate (vs the dozen of others ive acquired) instead of having a large void forward of my optic, is perfectly cut to match the slide, dropped the optic down, not having to use the 509t proprietary cut/pate, stacked on top, of another plate.
    Great piece, and it shows they are aware. Also, I got text messages, through the buy, ship, and receive process. These guys,.(like replacement T-post)…. just get it. Wicked happy.
    (Cz P10f, rmr/509t)



  40. Sabine RiverAuthority on June 29, 2022 at 7:58 pm

    Some company ripped off your law tactical folder video and used it for Advertisment on Face Book for a Chinese company. Wish I could post the screen shot here.



  41. Vincent C on June 29, 2022 at 7:59 pm

    why aluminum



  42. Colostomy Bag on June 29, 2022 at 7:59 pm

    I would disagree that the Glock plates are brittle. I bent one😂 and it didn’t crack.



  43. Adam W on June 29, 2022 at 8:02 pm

    I already bought an Aaron-approved plate. Why am I watching this video again? I don’t know, but thanks Red Dot Daddy for all your efforts for us noobs.



  44. Gaston Draco on June 29, 2022 at 8:04 pm

    Something even TAURUS got right with their optic ready models LOL



  45. Harrison on June 29, 2022 at 8:07 pm

    12:05 i short circuited watching him short circuit



  46. cafemike on June 29, 2022 at 8:07 pm

    I love the C&H Precision for the Glock MOS. Had a MOS screws strip and sent the optic into my eyebrow.



  47. Patchsmith on June 29, 2022 at 8:08 pm

    What sites do you recommend for this setup with the rmr , co witeness suppressor sites?



  48. Yaddi on June 29, 2022 at 8:08 pm

    Just got a 17 mos yesterday and I ordered the C&H plate last night. I used the glock plate on my 19 mos and I’m using the glock plate until this one arrives. Thanks for the info.



  49. Sm00th Top77 on June 29, 2022 at 8:13 pm

    Your explanations are intelligent and understandable.
    (SS/SW/MTS)
    I don’t know how you’re still doing burn downs.

    ***I need your clear black rim glasses brah, do they take prescriptions?***

    Ordering plate now.



  50. Quality Guru on June 29, 2022 at 8:16 pm

    C&H retrofitted the Glock MOS system to be the best in class of all optics ready carry pistols, and it’s not fair. How about something from C&H for the rest of us? I just wish that they would make one for the FN 509 pistol.