DIY Four Pistol Safe Rack Version 2
DIY Four Pistol Safe Rack Version 2
Rumble: https://rumble.com/user/Kotaboy32
Patreon: https://www.patreon.com/kotaboy32
Email: kotaboy32@gmail.com
Kotaboy32 Facebook Page: https://www.facebook.com/Kotaboy32-14…
Disclaimer: These videos are strictly for educational and entertainment purposes only. Imitation or the use of anything demonstrated in my videos is done AT YOUR OWN RISK. All work on firearms should be carried out by a licensed individual and all state and federal rules apply to such. We (including YouTube) will not be held liable for any injury to yourself or damage to your firearms resulting from attempting anything shown in any our videos. I do not endorse any specific product and this video is not an attempt to sell you a good or service. I am not a gun shop and DO NOT sell or deal in Firearms. Such a practice is heavily regulated and subject to applicable laws. I DO NOT sell parts, magazines, or firearms. These videos are free to watch and if anyone attempts to charge for this video notify us immediately. By viewing or flagging this video you are acknowledging the above.
Fair Use: In the rare instance I include someone else’s footage it is covered in Fair Use for Documentary and Educational purposes with intention of driving commentary and allowing freedom of speech. Check out My Website: https://www.kb32tac.com/
Rumble: https://rumble.com/user/Kotaboy32
Patreon: https://www.patreon.com/kotaboy32
Email: kotaboy32@gmail.com
Kotaboy32 Facebook Page: https://www.facebook.com/Kotaboy32-14…
Disclaimer: These videos are strictly for educational and entertainment purposes only. Imitation or the use of anything demonstrated in my videos is done AT YOUR OWN RISK. All work on firearms should be carried out by a licensed individual and all state and federal rules apply to such. We (including YouTube) will not be held liable for any injury to yourself or damage to your firearms resulting from attempting anything shown in any our videos. I do not endorse any specific product and this video is not an attempt to sell you a good or service. I am not a gun shop and DO NOT sell or deal in Firearms. Such a practice is heavily regulated and subject to applicable laws. I DO NOT sell parts, magazines, or firearms. These videos are free to watch and if anyone attempts to charge for this video notify us immediately. By viewing or flagging this video you are acknowledging the above.
Fair Use: In the rare instance I include someone else’s footage it is covered in Fair Use for Documentary and Educational purposes with intention of driving commentary and allowing freedom of speech. Patreon: https://www.patreon.com/kotaboy32
Email: kotaboy32@gmail.com
Kotaboy32 Facebook Page: https://www.facebook.com/Kotaboy32-14…
Disclaimer: These videos are strictly for educational and entertainment purposes only. Imitation or the use of anything demonstrated in my videos is done AT YOUR OWN RISK. All work on firearms should be carried out by a licensed individual and all state and federal rules apply to such. We (including YouTube) will not be held liable for any injury to yourself or damage to your firearms resulting from attempting anything shown in any our videos. I do not endorse any specific product and this video is not an attempt to sell you a good or service. I am not a gun shop and DO NOT sell or deal in Firearms. Such a practice is heavily regulated and subject to applicable laws. I DO NOT sell parts, magazines, or firearms. These videos are free to watch and if anyone attempts to charge for this video notify us immediately. By viewing or flagging this video you are acknowledging the above.
Fair Use: In the rare instance I include someone else’s footage it is covered in Fair Use for Documentary and Educational purposes with intention of driving commentary and allowing freedom of speech.
I have some of the hangers for safe shelves and haven’t had any issues with the plastic coating on those. There must be different grades of the stuff which might be worth looking into. Great idea. Now I need to get some more pistols. 🙂
Nice job, if you want go to a home center and by the plumbing section they sell clear vinyl tubing by the foot and slide that on the steel rods.
Kota!
Made the same but covered dowels with rubber heat shrink tubes
I’d sooner fill the action with cement as use steel rods in my barrel. No matter how you polished them (which depending on the type of metal just served to work harden the steel) you’re still gonna scratch the lands and grooves of the barrel. With the barrel returning to the same position each time and the the rods always dragging the same position it will scratch the barrel. I’d suggest either a composite material or carbon fiber. It looks great though and I’m gonna try something similar sans the steel. Just my opinion though and take that for what its worth.
Why couldn’t you use brass rod? It would be easier on the boar.
Very nice.
How did you attach the new metal rods to the boards?
Try using solid 8mm carbon fiber rod, find it on ebay, they use it for arrows.
Will not harm the barrels, similar to what Tipton uses for their carbon fiber cleaning rods.
Nice project. I like it! Do you think it is safe on the barrels over long term use?
use heat shrinks..
Have you considered using truck bed liner on the metal dows?
use hose on the rods
Like the design, but a much simpler solution is electrical heat shrink wrap over the steel. It doesnt peel or come off like the liquid rubber, and cheaper too.
Shrink wrap heated and a rubber cap
those are really nice.. good deal
Pretty cool functional DIY pistol rack….Good job…
Maybe add some shrink tube over your dowels for barrel protection.
just put heat shrink tubing on your rods
Best rods to use: easy to cut, super strong, zero friction damage and they hold 22lr to 50cal. Enough to make 15 to 20 rods:
https://amzn.to/3wTg0Zk
Nice design….might want to take a look at the clear acrylic rods..might be a bit easier on your barrels..
Very cool, you need to make a bunch of them and do a GAW!
It would be really helpful to have dimensions, materials list, suppliers, connections methods, etc. for these kind of projects.
Or you could try using shrink wrap that electricians use, or plastic bolts shaved down. Just some alternative ideas.
Brass or aluminum is even cheaper. Good job!
Looks good brother! Put the old school carb rubber vacuum hose over the metal rods, you can get different inside dia hose at any auto parts store. Carry On!
Great idees. I will try putting heat shrink on the metal rods
Cool DIY
Wrap the rods with electrical tape.
The wooden dowel will sag but will not snap. If it’s going to snap it will when you put it on. Not sure if it will deform over time.
nice———I could use one if you ever get into sales. Really a good idea
Im telling you. Awesome design pal. Only thing missing is protection for barrel rifling. You can accomplish that with electrical shrink wrap. Cheers
Great idea, I have the one thats foam that just holds em; plus a lot of good suggestions in the comments.
Nice idea. Hey why not try using shrink wrap on the steel rods. It would protect your barrels and won’t scrape off like Plastidip. Just my 2 cents!
Try some shrink wrap that they use for wires. Should be durable