9 Comments

  1. Soapy Bee on October 18, 2022 at 8:59 pm

    Would of been mad at the end if you pumped that bitch an let off a round or two



  2. Mark Potter on October 18, 2022 at 9:00 pm

    What color scotch bright pad do you recommend? They’re all a little different. Can you use modeling clay instead of playdoh or will that work? And just to be sure… it doesn’t have to be baked??? Good video!



  3. Irish One on October 18, 2022 at 9:01 pm

    Product works great. I stripped the gun to bare metal and put 4 coats on. Outstanding finish. I was concerned about painting things like the small sight adjustment screws, but they did not fill in. All markings are clearly legible. From the Duracoat website, the gun can be used the next day. We can ignore John Donovan from this point forward.The product instructions says even though it’s a 2 part paint, it remains usable for several weeks. If you have a few projects to do, it might make sense to have them all ready for finish work.I tried the cold blue fits before this. The finish wears off from simple handling. I used the flat black paint. It looks as smooth as the finish on new guns. Hopefully it will be durable. It being a 2 part paint lets me be a little hopeful about that.



  4. shootingvoodoo on October 18, 2022 at 9:07 pm

    Actually, per the instructions from Lauer Custom WeaponryCURE TIME
    DuraCoat dries to the touch in 20 minutes and can be handled in an hour. The firearm
    can be reassembled in 24 hours. You can then use your firearm as normal, but is not
    ready for extreme duty for 3-4 weeks.



  5. Chooch on October 18, 2022 at 9:13 pm

    Looks like Cal Ripken Jr. in the background?



  6. Michael Ramsey on October 18, 2022 at 9:15 pm

    Did you spray inside the receiver? Or tape it off? Great video!



  7. Alysha Wassam on October 18, 2022 at 9:19 pm

    How many cans did you use?



  8. Joshua Elliott on October 18, 2022 at 9:28 pm

    ☝👍



  9. George Barrera on October 18, 2022 at 9:44 pm

    Should i sandblast first