21 Comments

  1. Brandon on November 19, 2022 at 9:38 pm

    DD over priced. Payed that DD tax stamp lol….

  2. Gob on November 19, 2022 at 9:42 pm

    Probably the best way to help precision at 500y is to not bridge optics. A non monolithic rail still can rotate even with anti rotation pins or a generally secure lockup. LT Risers are G2G but mounting a heavy eotech at the cantelever puts a stress point on the overhang than having some part of it on top of the portion of the riser that is directly mounted on the receiver. That’s why the Unity, Scalar and other more modern risers are gaining much more traction apart from being more aesthetically pleasing. Seems like 3/4 were bridging optics, if you’d really wanna run a mbus on the rear, perhaps putting it at the furthest slot will help while maintaining all optics at the receiver. It’ll fit with an HHS, but with the more unconventional optics set up, not quite sure. Otherwise, a riser and an FTC will help. Longer cantelever (+2) optic mounts will help scopes will help keep the mount on the receiver and those that shoot NTCH for eye relief and eye box.

  3. Off Roster Handgun on November 19, 2022 at 9:42 pm

    Nice video!

  4. Michael Aurelisk on November 19, 2022 at 9:43 pm

    You forgot to introduce the guys in the beginning.

  5. StonoBandito on November 19, 2022 at 9:43 pm

    jfc those groupings.

  6. Gman on November 19, 2022 at 9:48 pm

    Awesome vid, wish I could’ve made it out there!

  7. Christian Jordan on November 19, 2022 at 9:51 pm

    First video I’ve watched and I like how you went into reasoning behind your builds. Keep up the good work

  8. MrMase12 on November 19, 2022 at 9:55 pm

    but also got to comment this shit pleb af

  9. matthewtrott on November 19, 2022 at 10:04 pm

    Awesome cant wait for more awesome content!

  10. Jacob B on November 19, 2022 at 10:05 pm

    Curious why you run your eotech so far forward on that mount. I understand why you do it, but rather mounting it without the bottom clamping onto the 1913 fully seems to make it less bomb-proof relying more on a small section vs actual designed intent. The more it’s engaged with the surface it’s mounted to, less likely to lose zero, get bumped, damaged…etc. Good luck with future vids!

  11. Fook-Jo By-Den on November 19, 2022 at 10:05 pm

    I’ve owned/own a few each from aero(M4E1)/DD/BCM/POF/SOLGW/Noveske.
    By FAR, My Favorite Combination is SOLGW(Any Brand that is OEM’d By Zev/MegaArms Would probably be very nice also), for receivers & wedge lock/drive lock rails. The billet broadsword receiver sets are easily the nicest set I’ve got my hands on. Pair with ample FCD Goodies. SD-C Trigger. A5 Buffer Tube, Geissele Super42 rifle length braided wire spring+BCM MK2-Mod1-T2(H2 Buffer), B5 SOPMOD stock, BCM mod3 pist grip, slate black industries hand stops. Bcgs(dd/BCM/solgw/Noveske marked RCA Black nitride w/C158Bolt & few others are GTG). Barrels(Noveske/DD/BCM/BFH/Centurion/RainierArns-Mountain Mod2 SDM Fluted 4150cmv nitrided middy/BRT CHF/ProofResearch-CF and others are gtg).

    White lights: Modlite OKW/18650/DS00/UT-HotButton/ArisakaDefense-Scout Mounts

    Optics: PA PLxC Gen2 1-8x ACSS Raptor M8 Meter/Badger Condition One 1.70”/1.93” Mount/35deg offset j-Arm(HE508 or HE509/RMR/Acro P2/Steiner M?? MRDS/T2/HE515GT-Elite-For Offset Dots)

    Slings: BFG/HaileyStrategic & many others are awesome. But what works for you.

    Magazines: Surefeed/OKayIndistriesMags/LancerL5wM’s(I get some gyy it s have issues with them. I have not what do ever. IF they ever begin having loose springs, I’ll try to replace Mag sprint& if they finials they’ll become cannon fodder for l range day)/Gen3 or Gen4 Pmags.

    To each their own. After about over a dozen rifles that each one fine tuned what I like don’t like as well as what does/doesn’t work for me.

    I also prefer to stress test each “hard use” rifle I complete with 500rounds in less than 10minutes with a max of 1 malfunction allowed. Fail to gobble all rounds in allotted time or more than one Malfunction & it’s a fail n it either fixed & retested, Scraped, of designated as hunting/range toy only use.

    Great video k solid info. Everyone has their preferences and as long as it meet ur Ned nothing wrong with that.

  12. Ethan G on November 19, 2022 at 10:06 pm

    Your la rue mount for your eotech is backwards. That thin piece of picatinny is for a magnifier because magnifiers don’t need to hold zero.

  13. Eli Moore on November 19, 2022 at 10:07 pm

    Can’t wait to get out there with my SBR!

  14. Ian Reilly on November 19, 2022 at 10:11 pm

    ETTS?

  15. mechadogzilla on November 19, 2022 at 10:11 pm

    Great video, you guys made me so proud to be American

  16. Waylork Skudz on November 19, 2022 at 10:17 pm

    last dudes rifle is busted af lmao

  17. John Rhodes on November 19, 2022 at 10:24 pm

    AKOU had a Daniel break after a few thousand rounds. PSA was the only AR that survived

  18. D G on November 19, 2022 at 10:29 pm

    Guys are so cute playing army lmao. Just got a ddm4v9, awesome gun!!

  19. Pizza Steak Pho Cheeseburger Ice Cream on November 19, 2022 at 10:31 pm

    trash gear

  20. Austin James on November 19, 2022 at 10:31 pm

    Does Bcm still make grey and green furniture, haven’t seen it in stock since Covid

  21. Hatsune miku 01 on November 19, 2022 at 10:35 pm

    Bro what the duck is going on with that eotech. Move that riser forward and stop making look like a poors build, you’ve literally got rail space

Leave a Comment