26 Comments

  1. Garrett on January 24, 2023 at 1:33 am

    What do I do if my screws aren’t long enough to lock onto my polymer handguard?

  2. Jan Nowak on January 24, 2023 at 1:34 am

    hello nice video.
    Overall, do you recommend it or not?

  3. David Zuniga on January 24, 2023 at 1:34 am

    Thank you! Got it installed. My brain was confused on how to tighten it lol

  4. Jose Rafael on January 24, 2023 at 1:39 am

    1000000000% on point. I tried doing it before watching anything and couldn’t figure it out. Watched this and it became obvious. So helpful.

  5. piupeoi on January 24, 2023 at 1:44 am

    I was so upset Thank you so much, Im such a newbie

  6. D Young on January 24, 2023 at 1:45 am

    Nice straight forward install and explanation, thanks for the help.

  7. B I C H Ã O on January 24, 2023 at 1:45 am

    Que chave é essa que vc usou???

  8. Native Scratcher on January 24, 2023 at 1:46 am

    The tool that he is using is a hex key 1/8.

  9. Chasing Space on January 24, 2023 at 1:46 am

    Thanks I was about to use the mlok rail but was scared of scratches but got my handstop installed lookin good

  10. the hogfather on January 24, 2023 at 1:50 am

    Excellent video, thank you

  11. Dtrust on January 24, 2023 at 1:50 am

    Best help indeed ty!!!!

  12. X Smith on January 24, 2023 at 1:51 am

    What size for the t tool

  13. QB1 on January 24, 2023 at 1:52 am

    "One tool job" can also be said for Picatinny rail accessories as well. All you need is a screwdriver lol!

  14. Hothenrik4570 on January 24, 2023 at 1:55 am

    I just purchased a Magpul MLOK MVG vertical grip but it only has one hole and 2 raised notches, one on each side. Haven’t tried to install yet. Hoping it works as well as this!

  15. UnimpressedGojira on January 24, 2023 at 1:58 am

    In case anyone did this: make sure not to push DOWN onto the screw head when tightening it to the nut while in the install position.

    I kept tightening it fine, but putting too much downwards pressure makes the nut stay put, apparently.

    When I just gently rotated it into position, the nuts would rotate accordingly and lock into place!

    Cheers, thanks for the video. Stupid easy, yet finnicky.

  16. Aslam C on January 24, 2023 at 1:59 am

    Hey, just wanted to say thank you. This was super helpful. I struggled with this and was cursing the Picatinny gods for falling out of favor compared to M-LOK, but this took my Magpul piece of plastic and turned it into a proper vertical foregrip. I still have a little trouble tightening one of them, but I think I’ll get it.

  17. rsorry on January 24, 2023 at 2:08 am

    Good tutorial homie 🔥

  18. Bands on January 24, 2023 at 2:12 am

    Have the same exact setup🔥

  19. SKINZ DEEP on January 24, 2023 at 2:12 am

    what kind of screwdriver is that T15?

  20. Gregory Hamilton on January 24, 2023 at 2:13 am

    Best grip out there I know the cool kids use BCM but I’ll never use anything but Magpul I hated the BCM!🤯🔫👍🏼

  21. Cody McGOnigle on January 24, 2023 at 2:17 am

    Thank you so much!! This helped me 1000% man you’re awesome!!

  22. Ty Jones on January 24, 2023 at 2:20 am

    Thanks for an actual installation video.. I was wondering how to tighten it before I purchased it.. The bottom is hollow🤦.. I’m sure that alot of people didn’t know that👌

  23. Aubert Hartmann on January 24, 2023 at 2:23 am

    I got the screws in but then it seems like i don’t have the right wrench to screw it in….🤦‍♂️ gonna get a long 1/8th wrench

  24. A.G.S Sal on January 24, 2023 at 2:25 am

    Does anyone know how to remove it ? i might have tightened it to much now I cant remove my grip . Sos

  25. cyber dragon456 on January 24, 2023 at 2:29 am

    Thank you with your tip I did it in under a minute

  26. Gilbert Sanchez on January 24, 2023 at 2:32 am

    CAN WE GO SHOOT IT NOW ??????🙃

Leave a Comment