Revolver Cylinder NOT LOCKING. (FIX)
Revolver Cylinder NOT LOCKING. (FIX)
Taurus Ultra Lite. Cylinder fix. “Cylinder Stop Plunger with Spring”. Under ten bucks, In under five Minutes!
Find me at The Reloaders Network…https://thereloadersnetwork.com/author/elvis-ammo/
Or UGEtube..
https://videos.utahgunexchange.com/@elvisammo
Hey Elvis where you at, it’s been a year. Hope all is well!
well there’s your problem… it’s a taurus. cool video. helpful info
Great video. Very helpful. Thanks so much for making it!
Where can I buy the parts?
Will this also help with the slight play in the cylinder, and help it lock up tighter?
Taurus is garbage
Can you give us the part number please. I have owned a 605 at least 25 years and have zero with problems with it. I bought a new 605 for my daughter and we went and shot it last week and the cylinder quit locking up. I hate to sent it to Taurus if I can fix it for $10. If I get this gun fixed it might be on the selling block and she could be getting a Ruger LCR. I got a great deal on this brand new gun but I don’t trust Taurus now. Thank you so much for an informative video. I reload and have watched all of you older videos.
Whats that screw called exactly? I am missing it for my revolver and have been trying to get that piece for a long time now.
🔫 The Assault Weapons Ban of 2019 (Wed 9/25=HR1296) Gets Committee Vote THIS WEEK https://m.youtube.com/watch?v=z8g_zG-1KNU
Elvis ammo have you ever used a 40 s&w case filled with lead as a wad cutter in a .44 mag.
Good vid thanks.
Can’t be a Smith and Wesson That be barbaric
Old technology (i.e.revolvers) are trying to come back to make money for the gun industry.
Good luck revolvers as when the *_over forty crowd_* dies so too will you.
How did you find the parts? It’s an absolute nightmare trying to find parts for my Raging Hunter .357mag. Just purchased it and it is already a paperweight… 😖🤡
Great video! Can you post the link to order same plunger and spring? Please and thank you!
Too bad the commie scum at youtube have driven off great content providers like Elvis. That is okay though, another, better platform that respects freedom of thought and free speech will come along eventually.
Thank you. Very useful information.
Brass balls doing that outside on grass!!!!
The usual problem in on the right side of the frame where it says “Taurus”.
Elvis: Haven’t heard from you in a while. I truly miss your input to the reloading shooting enthusiasts. Hope all is well with you and family. You have a dedicated group of friends out there. God bless.
I need that exact plunger and spring I can’t find it anywhere online where did you order from and how
Hey bro, where did you order your parts from. I have a brazil 357 Taurus magnum and the chamber spins completely freely. After watching your video and talking mines apart, I saw that the plunger didn’t have a spring at all😂😂. Thanks for the video, it was extremely helpful.
Thank you for your posting but where did you get the parts (the stop plunger & the spring kit)?
Hey buddy You Know Where I Could Get The Bolts And Springs I lost Mine
that rebel gun tryna prove you wrong lol
Whereyat?
Abducted by 👽???
Thanks to your video, I was able to fix my taurus 605 myself. Thank you sir!!
Dude, thank you so much for making this video. I have the same problem with my Taurus 605 357. I’m new to guns but I figured something was wrong with the cylinder when I can rotate clockwise easily by hand. I’m going to contact Taurus and tell them about this problem. Hopefully they can send me the part and I can do the fix myself. Again, thank you for this video!
Where do you get your parts from? Having the same issue with a Taurus tracker
Really useful vid thanks
Howdy sweet video I’ve got the Torres 44 magnum raging Bull 6 inch barrel went to go clean it after the range in the cylinder fell open crane was poking out finally figured out it was that little screw with the spring I guess it’s a cylinder spring for the crane spring if I tightened it too much the cylinder won’t drop what gives?Thanks mama baby
HELP —> QUESTION: my new (used) 686+ fires ONCE in double action but HAMMER won’t automatically RECOCK after round fired. Then CYLINDER TURNS when pulling trigger while hammer sits in position (pulling trigger over and over I get rotation of cylinder but that’s it). Thank you!!!! -FRUSTRATED
I know I’m late , but I have a Taurus 80 that was sloppy because there was so much crud in the cylinder stop plunger spring , that the spring wouldn’t extend correctly …
Good clean up and she tightened right up.
Thank you sir, great video. I’m going to try this on my Taurus MD 82.
Where did you buy the replacement?
used this to figure whats wrong with my airsoft gun i have a missing spring great tutorial
My 605 doesn’t always lock up in single action. Would this be a fix for that as well?
Thanks I learned something!
I notice that the cylinder comes out easily. On my new Taurus 856 Ultra-Lite it takes the combined strength of Superman and the Hulk to push the lever enough to get the cylinder to open. Any suggestions other than returning it to the factory.
Where did you buy your parts?
Lovely video. Thanks for dissassembling it, it was very informative
Does anyone know where I can buy a replacement plunger
Well theres your problem. Its a new tarus.
I found the problem “taurus”
My vintage Mondial Brevettata 999 doesn’t rotate when shooting and a small tear shaped piece fell off from inside. Need help
Where can i find this spring
Been looking for a way to fix this problem
This glock is different from the one I got from *mrmasterglock on wickr* the one I got, has a switch them told me it a new gun
Where I can get a cylinder stop at? I also need the side plate yoke screw can anybody help me out. Thanks
Hey buddy where did you order your cylinder stop plunger with spring from